Book Home Programming PerlSearch this book

13.3. Overloadable Operators

You can only overload certain operators, which are shown in Table 13-1. The operators are also listed in the %overload::ops hash made available when you use overload, though the categorization is a little different there.

Table 13.1. Overloadable Operators

Category Operators
Conversion "" 0+ bool
Arithmetic + - * / % ** x . neg
Logical !
Bitwise & | ~ ^ ! << >>
Assignment += -= *= /= %= **= x= .= <<= >>= ++ --
Comparison == < <= > >= != <=> lt le gt ge eq ne cmp
Mathematical atan2 cos sin exp abs log sqrt
Iterative <>
Dereference ${} @{} %{} &{} *{}
Pseudo nomethod fallback =>

Note that neg, bool, nomethod, and fallback are not actual Perl operators. The five dereferencers, "", and 0+ probably don't seem like operators either. Nevertheless, they are all valid keys for the parameter list you provide to use overload. This is not really a problem. We'll let you in on a little secret: it's a bit of a fib to say that the overload pragma overloads operators. It overloads the underlying operations, whether invoked explicitly via their "official" operators, or implicitly via some related operator. (The pseudo-operators we mentioned can only be invoked implicitly.) In other words, overloading happens not at the syntactic level, but at the semantic level. The point is not to look good. The point is to do the right thing. Feel free to generalize.

Note also that = does not overload Perl's assignment operator, as you might expect. That would not do the right thing. More on that later.

We'll start by discussing the conversion operators, not because they're the most obvious (they aren't), but because they're the most useful. Many classes overload nothing but stringification, specified by the "" key. (Yes, that really is two double-quotes in a row.)

Conversion operators: "", 0+, bool

These three keys let you provide behaviors for Perl's automatic conversions to strings, numbers, and Boolean values, respectively.

We say that stringification occurs when any nonstring variable is used as a string. It's what happens when you convert a variable into a string via printing, interpolation, concatenation, or even by using it as a hash key. Stringification is also why you see something like SCALAR(0xba5fe0) when you try to print an object.

We say that numification occurs when a nonnumeric variable is converted into a number in any numeric context, such as any mathematical expression, array index, or even as an operand of the .. range operator.

Finally, while nobody here quite has the nerve to call it boolification, you can define how an object should be interpreted in a Boolean context (such as if, unless, while, for, and, or, &&, ||, ?:, or the block of a grep expression) by creating a bool handler.

Any of the three conversion operators can be autogenerated if you have any one of them (we'll explain autogeneration later). Your handlers can return any value you like. Note that if the operation that triggered the conversion is also overloaded, that overloading will occur immediately afterward.

Here's a demonstration of "" that invokes an object's as_string handler upon stringification. Don't forget to quote the quotes:

package Person;

use overload q("") => \&as_string;

sub new {
    my $class = shift;
    return bless { @_ } => $class;
}

sub as_string {
    my $self = shift;
    my ($key, $value, $result);
    while (($key, $value) = each %$self) {
        $result .= "$key => $value\n";
    }
    return $result;
}

$obj = Person->new(height => 72, weight => 165, eyes => "brown");

print $obj;
Instead of something like Person=HASH(0xba1350), this prints (in hash order):
weight => 165
height => 72
eyes => brown
(We sincerely hope this person was not measured in kg and cm.)

Arithmetic operators: +, -, *, /, %, **, x, ., neg

These should all be familiar except for neg, which is a special overloading key for the unary minus: the - in -123. The distinction between the neg and - keys allows you to specify different behaviors for unary minus and binary minus, more commonly known as subtraction.

If you overload - but not neg, and then try to use a unary minus, Perl will emulate a neg handler for you. This is known as autogeneration, where certain operators can be reasonably deduced from other operators (on the assumption that the overloaded operators will have the same relationships as the regular operators). Since unary minus can be expressed as a function of binary minus (that is, -123 is equivalent to 0 - 123), Perl doesn't force you to overload neg when - will do. (Of course, if you've arbitrarily defined binary minus to divide the second argument by the first, unary minus will be a fine way to throw a divide-by-0 exception.)

Concatenation via the . operator can be autogenerated via the stringification handler (see "" above).

Logical operator: !

If a handler for ! is not specified, it can be autogenerated using the bool, "", or 0+ handler. If you overload the ! operator, the not operator will also trigger whatever behavior you requested. (Remember our little secret?)

You may be surprised at the absence of the other logical operators, but most logical operators can't be overloaded because they short-circuit. They're really control-flow operators that need to be able to delay evaluation of some of their arguments. That's also the reason the ?: operator isn't overloaded.

Bitwise operators: &, |, ~, ^, <<, >>

The ~ operator is a unary operator; all the others are binary. Here's how we could overload >> to do something like chop:

package ShiftString;

use overload
    '>>' => \&right_shift,
    '""' => sub { ${ $_[0] } };

sub new {
    my $class = shift;
    my $value = shift;
    return bless \$value => $class;
}

sub right_shift {
    my ($x, $y) = @_;
    my $value = $$x;
    substr($value, -$y) = "";
    return bless \$value => ref($x);
}

$camel = ShiftString->new("Camel");
$ram = $camel >> 2;
print $ram;            # Cam

Assignment operators: +=, -=, *=, /=, %=, **=, x=, .=, <<=, >>=, ++, --

These assignment operators might change the value of their arguments or leave them as is. The result is assigned to the lefthand operand only if the new value differs from the old one. This allows the same handler to be used to overload both += and +. Although this is permitted, it is seldom recommended, since by the semantics described later under "When an Overload Handler Is Missing (nomethod and fallback)", Perl will invoke the handler for + anyway, assuming += hasn't been overloaded directly.

Concatenation (.=) can be autogenerated using stringification followed by ordinary string concatenation. The ++ and -- operators can be autogenerated from + and - (or += and -=).

Handlers implementing ++ and -- are expected to mutate (alter) their arguments. If you wanted autodecrement to work on letters as well as numbers, you could do that with a handler as follows:

package MagicDec;

use overload
    q(--) => \&decrement,
    q("") => sub { ${ $_[0] } };

sub new {
    my $class = shift;
    my $value = shift;
    bless \$value => $class;
}

sub decrement {
    my @string = reverse split(//, ${ $_[0] } );
    my $i;
    for ($i = 0; $i < @string; $i++ ) {
        last unless $string[$i] =~ /a/i;
        $string[$i] = chr( ord($string[$i]) + 25 );
    }
    $string[$i] = chr( ord($string[$i]) - 1 );
    my $result = join('', reverse @string);
    $_[0] = bless \$result => ref($_[0]);
}

package main;

for $normal (qw/perl NZ Pa/) {
    $magic = MagicDec->new($normal);
    $magic--;
    print "$normal goes to $magic\n";
}
That prints out:
perl goes to perk
NZ goes to NY
Pa goes to Oz
exactly reversing Perl's magical string autoincrement operator.

The ++$a operation can be autogenerated using $a += 1 or $a = $a + 1, and $a-- using $a -= 1 or $a = $a - 1. However, this does not trigger the copying behavior that a real ++ operator would. See "The Copy Constructor" later in this chapter.

Comparison operators: ==, <, <=, >, >=, !=, <=>, lt, le, gt, ge, eq, ne, cmp

If <=> is overloaded, it can be used to autogenerate behaviors for <, <=, >, >=, ==, and !=. Similarly, if cmp is overloaded, it can be used to autogenerate behaviors for lt, le, gt, ge, eq, and ne.

Note that overloading cmp won't let you sort objects as easily as you'd like, because what will be compared are the stringified versions of the objects instead of the objects themselves. If that was your goal, you'd want to overload "" as well.

Mathematical functions: atan2, cos, sin, exp, abs, log, sqrt

If abs is unavailable, it can be autogenerated from < or <=> combined with either unary minus or subtraction.

An overloaded - can be used to autogenerate missing handlers for unary minus or for the abs function, which may also be separately overloaded. (Yes, we know that abs looks like a function, whereas unary minus looks like an operator, but they aren't all that different as far as Perl's concerned.)

Iterative operator: <>

The <> handler can be triggered by using either readline (when it reads from a filehandle, as in while (<FH>)) or glob (when it is used for fileglobbing, as in @files = <*.*>).

package LuckyDraw;
 
use overload
    '<>' => sub {
        my $self = shift;
        return splice @$self, rand @$self, 1;
    };
 
 
sub new {
    my $class = shift;
    return bless [@_] => $class;
}
 
package main;
 
$lotto = new LuckyDraw 1 .. 51;
 
for (qw(1st 2nd 3rd 4th 5th 6th)) {
    $lucky_number = <$lotto>;
    print "The $_ lucky number is: $lucky_number.\n";
}
 
$lucky_number = <$lotto>;
print "\nAnd the bonus number is: $lucky_number.\n";
In California, this prints:
The 1st lucky number is: 18
The 2nd lucky number is: 11
The 3rd lucky number is: 40

The 4th lucky number is: 7
The 5th lucky number is: 51
The 6th lucky number is: 33
 
And the bonus number is: 5

Dereference operators: ${}, @{}, %{}, &{}, *{}

Attempts to dereference scalar, array, hash, subroutine, and glob references can be intercepted by overloading these five symbols.

The online Perl documentation for overload demonstrates how you can use this operator to simulate your own pseudohashes. Here's a simpler example that implements an object as an anonymous array but permits hash referencing. Don't try to treat it as a real hash; you won't be able to delete key/value pairs from the object. If you want to combine array and hash notations, use a real pseudohash (as it were).

package PsychoHash;

use overload '%{}' => \&as_hash;

sub as_hash {
    my ($x) = shift;
    return { @$x };
}

sub new {
    my $class = shift;
    return bless [ @_ ] => $class;
}

$critter = new PsychoHash( height => 72, weight => 365, type => "camel" );

print $critter->{weight};   # prints 365
Also see Chapter 14, "Tied Variables", for a mechanism to let you redefine basic operations on hashes, arrays, and scalars.

When overloading an operator, try not to create objects with references to themselves. For instance,

use overload '+' => sub { bless [ \$_[0], \$_[1] ] };
This is asking for trouble, since if you say $animal += $vegetable, the result will make $animal a reference to a blessed array reference whose first element is $animal. This is a circular reference, which means that even if you destroy $animal, its memory won't be freed until your process (or interpreter) terminates. See "Garbage Collection, Circular References, and Weak References" in Chapter 8, "References".



Library Navigation Links

Copyright © 2002 O'Reilly & Associates. All rights reserved.